Menzerna PO203是一款去除2000至2500號的砂紙線，螺旋痕和污漬的專業拋光劑。它不含矽，水融性，中切削力，拋光後不留塵末，適用於機器操作處理。

 

Cut = 3.2 , Gloss = 3.8

Cut代表切削力，Gloss代表光亮度

應用範圍： 

-去除2000至2500號的砂紙線

-去處細小划痕，螺旋痕和污漬

產品特點：

-水融性

-不含矽

-適用於各種漆面

-使用完後不留塵末

-處理時間短，鏡面效果佳

Get two-step results with Menzerna’s all-in-one swirl remover and polish!

Menzerna Power Finish PO 203 one polish designed to produce a fantastic gloss in less time than a two step polish process. Designed for the OEM market, Power Finish delivers a shine like Nano Polish with a cutting ability approaching Super Intensive Polish. Eliminate imperfections and rev up the gloss in just one step!

Menzerna Power Finish PO 203 is made for the OEM market as a quick way to polish out light flaws and amplify the paint’s gloss. It has the cutting ability just a step below Super Intensive. This will remove moderate to mild swirls, water spots, and light scratches. Then Menzerna Power Finish PO 203 does something amazing – it burnishes the paint to an ultra high gloss, like you’d expect from Nano Polish. For busy detailers, Menzerna Power Finish PO 203 saves time and money by doing the work of two products.

Menzerna Power Finish PO 203 is formulated for all clear coats. It addresses the most common paint condition on the most common paint on the road today. Power Finish is an everyday detailing product. It removes the light to mid-range imperfections that plaque most vehicles and then leaves a silky smooth gloss. Menzerna Power Finish PO 203 and a wax are often all you need to restore a deep gloss to the paint.

Menzerna Power Finish PO 203 contains Menzerna’s uniform, finely milled abrasives. The polish is packed with a high concentration of abrasives to level imperfections effectively without marring. Therefore, you can achieve a high gloss shine in fewer steps… and with fewer polishes!

Menzerna Power Finish PO 203 is a silicone-free, low-dusting polish. It is body shop safe and easy to clean up. Just like all Menzerna polishes, Power Finish should be applied with a polisher for best results. We recommend using a polishing pad.

Whether you’re a professional detailer, auto refinisher or an enthusiast, Menzerna Power Finish PO 203 saves you time and money by creating a mirror shine in less time and with fewer polishes. One polish, one step, one fantastic result. Menzerna Power Finish PO 203 is the only polish you need.

Application by Machine:

1. Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Menzerna Power Finish PO 203 out of direct sunlight.
2. Use a soft foam polishing pad, like Lake Country’s CCS White Polishing Pad or Green Polishing/Finishing Pad. Apply a bead of Power Finish to the pad. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.
3. Polish at 1500-2000 RPM (4-5 on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the swirls have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.
4. Wipe the area with a damp Cobra Microfiber Towel.
5. Always apply a wax or sealant after polishing. We recommend Wolfgang Deep Gloss Paint Sealant 3.0 to seal in the shine with its long-lasting polymer formula.